20HP & 25HP 3phase Professional Floor Grinding Machine with Planetario Head
BK 850: Floor grinding and polishing machine for medium and big sized surfaces available into two versions of 20 and 25 HP.
- Working width 850 mm with 3 large size 340 mm tools.
- Speed of tools ranging from 300 to 1300 rpm.
- Automatic adjustment of the working pressure.
- Strong gear box with thermo-hardened steel gears for a longer life.
- Adjustable inclination of the Planetario to allow a bigger frontal cutting.
- No noise during the work.
- Third insertable front wheel for easy transport and to load into the van.
- Auto levelling Planetario System.
|Model||BK 850 20HP||BK 850 25HP|
|Motor||20 HP||25 HP|
|Driver Inverter||18.5 kW||18.5 kW|
|Speed Tools||300-1300 rpm||300-1300 rpm|
|Water Tank||46 lt||46 lt|
|Dimension LxAxP cm||150x150x95||150x150x95|
|Weight||441 Kg||451 Kg|
|Floor System||Square Meters per hour*|
|Superconcrete 7 step||25-30m2/h|
|Concrete Grinding 1 step||100-130m2/h|
|Terrazzo Polishing 5 step||30-40m2/h|
|Resin Removing 1 step||100-150m2/h|
|Varnish Removing 1 step||100-150m2/h|
|Marble Polishing 5 step||20-30m2/h|
|Granite Polishing 7 step||10-15m2/h|
*Production numbers may vary according to surface conditions, diamonds used, equipment operator, etc.
Data For Shipping
|Dimensioni||160 x 160 x 110 cm|
- It makes for easy transportation.
- It allows to regulate the working pressure.
- It allows to inclination on the Planetario head.
- It is very useful when working on very uneven floors.
Check if the competitors machine has the third front wheel.
- BK450: Working section 450mm with 3 tools diameter 140mm. BK Attack system.
- BK500: Working section 500mm with 3 tools diameter 200mm. Quick Attack system.
- Challenger 600: Working section 600mm with 3 tools diameter 240mm. Quick Attack system.
- Challenger 800: Working section 800mm with 4 tools diameter 240mm. Quick Attack system.
- BK650: Working section 650mm with 3 tools diameter 240mm. Quick Attack system.
- BK750: Working section 750mm with 3 tools diameter 240mm. Quick Attack system.
- BK850: Working section 850mm with 3 tools diameter 240mm. Quick Attack system.
- BK950: Working section 950mm with 3 tools diameter 340mm. Quick Attack system.
Check the size of the tools. Many machine has the same working area but the tools are smaller. Smaller are the tools, less will be the performance.
- It must be “active system” and not passive system. After an emergency if we push the START BOTTOM the machine does not start the operator has to follow the instructions.
- If the operator leaves the REMOTE CONTROL the machine stops working avoiding any injuries.
- Continue Control System.
- A intelligent Remote Control device allowed to check the presence of the operator according the safety rules
- If the operator leaves the device, the remote control stops the machine immediately.
- If the operator leaves the device it cannot be used from any other unauthorized operator to avoid any injuries.
- DEAD MAN SWITCH: all automatic movements are under control by “dead man safety device “in order to work free but in total safety.